Pass Benchmark: 70% (21/30) • Standard: USCG NMC / 46 CFR

USCG Deck General (Set 103)

30:00

|

Question 1 of 30

Question Navigator

Correct Incorrect Pending Starred

Question 1 of 30

A well kick while drilling from a MODU will cause __________.

Browse Questions in Set 103

30 MCQs

#1 A well kick while drilling from a MODU will cause __________. #2 The most accurate method for measuring drilling mud required to fill the hole when drill stem is removed is by use of a __________. #3 A drilling bit which is doughnut shaped to permit recovery of the center portion of the hole drilled is called a __________. #4 A casing string that is run below the previous casing string, but does not extend to the wellhead is called a __________. #5 To prevent the riser system from buckling under its own weight, upward tension is provided by the __________. #6 For the DEEP DRILLER, the maximum permissible offset which can be tolerated while drilling is __________. #7 What is the weight in long tons of 180 barrels of 15 pound per gallon drilling mud? #8 What is the weight of 100 barrels of 17 pound per gallon drilling mud? #9 The sounding level of 12 lb. per gallon mud in mud pit 1S of the COASTAL DRILLER is 5.5 feet. What is the weight of the mud? #10 The sounding level of 17 lb. per gallon mud in mud pit 2S of the COASTAL DRILLER is 7.75 feet. What is the weight of the mud? #11 The required fireman's outfits required for MODU's are not to be used for any other purpose EXCEPT for the __________. #12 What equipment is included in the fireman's outfit? #13 On a MODU, a CO2 extinguisher is checked by __________. #14 A CO2 extinguisher which has lost 10% of its charge must be __________. #15 Clean air standards referred to as "Grade D" apply to compressed air for use in __________. #16 Each fireman's outfit and its spare equipment on a MODU must be stowed __________. #17 Any firefighting equipment that is carried in addition to the minimum required number on a MODU must __________. #18 The size of fire hydrant hose connections must be either 1-1/2 inches or __________. #19 Each fire hydrant serving machinery spaces containing oil fired boilers, internal combustion machinery, or oil fuel units must be equipped with a __________. #20 On offshore drilling units, each fire station is required to be fitted with at least one spanner and at least one __________. #21 On offshore drilling units, each fire station is required to be fitted with a hose which has a nominal diameter of __________. #22 Fire extinguishers used on MODU's are numbered by size I through V, with I being __________. #23 The international shore connection required on a MODU is designed to __________. #24 Automatic mechanical ventilation shutdown is required for CO2 systems protecting the __________. #25 What must be provided on a MODU helicopter deck that is equipped with fueling facilities? #26 How many fireman's outfits are required on a MODU? #27 What is best suited for fighting a fire in a ballast control room? #28 On a MODU, a fixed carbon dioxide or other approved system must be installed __________. #29 The preferred agent used in fighting a helicopter crash fire on a MODU is __________. #30 What is the most vulnerable part of the fire main system on board an offshore rig?

Question Discussion & Notes

0

Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.

Loading mariner discussions...