Type a keyword to start searching...

Use ⌘K or Ctrl+K to search from anywhere

USCG QMED Exam Practice Test

Prepare for your Qualified Member of the Engine Department (QMED) ratings—including Oiler, Fireman/Watertender, Junior Engineer, and Electrician. Practice 5,800+ authentic NMC exam questions across General Subjects, Motor Plants, Steam, Marine Electrical, and Refrigeration with 46 CFR rule explanations.

6 Core Modules
Oiler & Junior Engineer
70% Pass
35/50 Minimum
5,800+ MCQs
Full Engine Bank
46 CFR Part 12
Federal Standards

QMED Examination Subject Modules

Select any engine module below to practice authentic NMC questions with complete mechanical, electrical, and regulatory answer rationales.

QMED Module 01

Covers centrifugal and positive displacement pumps, valves, piping systems, heat exchangers, oily water separators, purifiers, steering gears, and deck machinery.

Exam Passing Score: 70% (35/50)
Question Bank: 1,128+ MCQs
Practice Questions
QMED Module 02

Two-stroke and four-stroke diesel engine operation, fuel injection, turbocharging, lube oil systems, cooling water treatment, governor operation, and auxiliary package boilers.

Exam Passing Score: 70% (35/50)
Question Bank: 947+ MCQs
Practice Questions
QMED Module 03

AC/DC circuit theory, generator paralleling, motor controllers, circuit breakers, emergency switchboards, battery maintenance, grounding faults, and electrical safety under 46 CFR Subchapter J.

Exam Passing Score: 70% (35/50)
Question Bank: 1,386+ MCQs
Practice Questions
QMED Module 04

Machinery space firefighting (fixed CO2, water mist, foam), confined space entry, lockout/tagout, MARPOL Annex I oil discharge limits, and OSHA/USCG industrial safety protocols.

Exam Passing Score: 70% (35/50)
Question Bank: 968+ MCQs
Practice Questions
QMED Module 05

Vapor compression refrigeration cycles, R-134a/R-404A systems, thermostatic expansion valves (TXV), compressor overhauls, leak detection, and HVAC psychrometrics.

Exam Passing Score: 70% (35/50)
Question Bank: 610+ MCQs
Practice Questions
QMED Module 06

Water-tube boilers, burner management, feed water chemistry, superheaters, deaerating feed tanks, main steam turbines, and vacuum systems.

Exam Passing Score: 70% (35/50)
Question Bank: 811+ MCQs
Practice Questions
Engine Career Guide

Understanding QMED Endorsements (46 CFR 12.501)

Depending on your career goals—from commercial tugs and offshore supply vessels (OSVs) to deep-sea container ships—the USCG issues separate QMED rating endorsements.

QMED - Oiler

The most common engine department entry rating. Oilers stand watch with the licensed engineering officer, monitor lube oil temperatures and pressures, take sounding of bilge and fuel tanks, and perform routine machinery lubrication. Tests on General Subjects and Motor Plants (or Steam).

QMED - Junior Engineer

The highest unlicensed engine rating. Junior Engineers assist licensed engineers in overhauling main engines, auxiliaries, pumps, and electrical gear. Requires passing General Subjects, Motor, Steam, Electricity, and Refrigeration.

QMED - Electrician / Refrigerating Engineer

Specialized ratings focused on shipboard power generation, motor control centers (MCC), emergency generators, container reefer plugs, and provisions refrigeration systems.

QMED - Fireman / Watertender

Essential for steam vessels and auxiliary boilers. Focuses on boiler water level control, burner management, feed pump operation, and boiler water chemistry testing.

Frequently Asked Questions

Common questions about eligibility, sea time requirements, and testing for the USCG QMED rating.

What is the USCG QMED rating?
QMED stands for Qualified Member of the Engine Department. It is an unlicensed merchant mariner credential issued by the U.S. Coast Guard National Maritime Center (NMC) under Title 46 CFR Part 12, certifying that an engine room crewmember possesses the technical knowledge to stand a machinery watch, maintain propulsion equipment, and safely operate auxiliary shipboard systems.
What are the specific QMED rating endorsements available?
Under 46 CFR 12.501, mariners can earn specific QMED endorsements including: QMED - Oiler, QMED - Fireman/Watertender, QMED - Junior Engineer, QMED - Electrician/Refrigerating Engineer, QMED - Pumpman/Machinist, or the comprehensive QMED - Any Rating endorsement which qualifies you for all unlicensed engine room positions.
What are the sea service requirements to qualify for QMED?
Under 46 CFR 12.503, to sit for a specific QMED rating exam (such as Oiler or Fireman), a candidate must document at least 180 days of engine department service as an Entry-Level Wiper aboard qualifying commercial vessels. For the QMED - Any Rating endorsement, the USCG requires 1,080 days (3 years) of engine room service, or completion of an approved maritime apprenticeship/academy engine training program.
What is the passing score on USCG QMED exams?
Every QMED module administered by an NMC Regional Exam Center requires a minimum passing score of 70% (at least 35 correct answers out of 50 questions). There are no trick averaging schemes—each assigned module must be independently passed.
What modules must I take for QMED Oiler vs Junior Engineer?
For QMED - Oiler, candidates typically test on General Subjects and Motor Plants (or Steam Plants depending on propulsion request). For QMED - Junior Engineer, candidates test on General Subjects, Motor Plants, Steam Plants, Electrical Systems, and Refrigeration. Practicing with BrightMariner's authentic NMC engine test banks covers every question in the official USCG database.
How can I study for the QMED exam for free without expensive training courses?
BrightMariner provides completely free access to over 5,800+ authentic USCG marine engineering questions with detailed explanations citing 46 CFR, marine diesel mechanics, electrical fundamentals, and thermodynamics. You can practice untimed or timed 50-question sets identical to official REC exam sessions.