Type a keyword to start searching...

Use ⌘K or Ctrl+K to search from anywhere
Pass Benchmark: 70% (21/30) Standard: USCG NMC / 46 CFR

USCG Deck General (Set 5)

|
Question 1 of 30
Question Navigator
Correct Incorrect Pending Starred
Question 1 of 30

Your vessel's existing draft is FWD 14'-00", AFT 16'-00". Using the Guidance Manual for Loading M.V. GRAND HAVEN, determine the new draft if 350 long tons are discharged from No. 13 hatch.

Browse Questions in Set 5

30 MCQs
#1 Your vessel's existing draft is FWD 14'-00", AFT 16'-00". Using the Guidance Manual for Loading M.V. GRAND HAVEN, determine the new draft if 350 long tons are discharged from No. 13 hatch. #2 Using the Guidance Manual for Loading M.V. Grand Haven, determine the amount of ballast required in tank No. 5 (P & S) to maintain drafts of 17'-00" forward and 22'-06" aft for a vessel loaded with grain which has a test weight of 35 lbs. #3 Using the Guidance Manual for Loading the M.V. Grand Haven, determine the amount of ballast required in tank No. 1 (P&S) to maintain drafts of 17'-00" forward and 22'-06" aft for a vessel loaded with grain which has a test weight of 43 lbs. #4 Using sheet 25 in the Guidance Manual for Loading M.V. Grand Haven, determine the amount of ballast required in tank No. 5 (P & S) to maintain drafts of 17'-00" forward and 22'-06" aft for a vessel loaded with grain which has a test weight of 33 lbs. #5 Assuming that the recommended hatch loading sequence is followed, how many long tons of iron ore may be loaded through hatch No. 20 while using a single belt loader to arrive at a desired mean keel draft of 24'-10"? (Use the Guidance Manual for Loading M.V. GRAND HAVEN.) #6 Assuming that the recommended hatch loading sequence is followed, how many long tons of iron ore may be loaded through hatches 2, 6, & 10, while using a single belt loader, to arrive at a desired mean keel draft of 27'-07"? (use the Guidance Manual for Loading M.V. GRAND HAVEN) #7 Assuming that the recommended hatch loading sequence is followed, how many long tons of iron ore may be loaded through hatches 5 & 7 while using a single belt loader, to arrive at a desired mean keel draft of 25'-02"? (Use the Guidance Manual for Loading M.V. GRAND HAVEN.) #8 Assuming that the recommended hatch loading sequence is followed, how many long tons of iron ore may be loaded through hatch No. 1 while using a single belt loader to arrive at a desired mean keel draft of 29'-11"? (use the Guidance Manual for Loading M.V. GRAND HAVEN) #9 A channel is stated as having a controlling depth of 38 feet. Which statement is TRUE? #10 Which basic category of water level fluctuations on the Great Lakes is the most regular? #11 Distances on the Great Lakes System are generally expressed in __________. #12 Which of the Great Lakes is most affected by short-term Lake level fluctuations? #13 Which of the Great Lakes experiences the least amount of water level fluctuation between seasonal high and low water marks? #14 Assume that your vessel has just entered Lake Michigan via the Straits of Mackinac and is proceeding south to Chicago. Which statement is TRUE with respect to the aids to navigation you will encounter along this route? #15 Nautical charts published by the Canadian Hydrographic service which are referenced in the United States Coast Pilot are identified by __________. #16 Assume that your vessel has just entered Lake Erie by way of the Welland Canal and is proceeding in a southwesterly direction. Which statement about the aids to navigation you can expect to encounter along the route is TRUE? #17 Your vessel is approaching the International Bridge on the St. Marys River. If the gage on the bridge, read from top to bottom, indicates 124 ft. and the IGLD (1955) is 600 ft., determine the actual vertical clearances between the existing water level and the lowest point of the bridge over the channel. #18 Which publication offers information on Great Lakes ice services? #19 Your vessel is underway and approaching an overhead obstruction on Lake Superior. Given the following information, determine the clearance between your vessel and the obstruction. Highest point on vessel: 74 ft. Lowest point of obstruction: 126 (LWD) Monthly lake level: +2 (LWD) International Great Lakes Datum: 600.0 (182.88 meters) #20 A list man would expect to see any of the following light signals EXCEPT __________. #21 Nearly half of all storms that enter the Great Lakes Basin during the period from October through May come from __________. #22 Advection fog, a common occurrence on the Great Lakes, forms when __________. #23 Which type of fog is the most dense and widely spread of those that occur on the Great Lakes? #24 Advection fog holds longest over which portions of the lakes? #25 Which statement is TRUE concerning weather conditions on the Great Lakes? #26 Which statement concerning storm surges on the Great Lakes is FALSE? #27 On the Great Lakes, winter storms compound the ice threat by bringing a variety of wind, wave, and weather problems on an average of every __________. #28 Fog can form in any season on the Great Lakes, but it is most likely to occur over open waters in __________. #29 What is NOT characteristic of the conditions which would be experienced by a vessel located southeast of an approaching eastward-moving storm center on the Great Lakes? #30 The phenomenon known as a "seiche" is most likely to occur on Lake Erie __________.

Question Discussion & Notes

0

Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.

Leave a Comment / Clarification

By posting, you agree to our Terms & Moderation Policy.

Loading mariner discussions...