Pass Benchmark: 70% (21/30) • Standard: USCG NMC / 46 CFR
USCG Safety & Environmental Protection (Deck) (Set 41)
30:00
|Question 1 of 30
Question Navigator
Correct Incorrect Pending Starred
Question 1 of 30
In launching a lifeboat, when should the tricing pendants be released?
Browse Questions in Set 41
30 MCQs #1 In launching a lifeboat, when should the tricing pendants be released? #2 When lowering a boat with gravity davits, it will be pulled into the embarkation deck by the __________. #3 Which sequence is correct when launching a lifeboat stowed in gravity davits? #4 Upon hearing the abandon ship signal, you put on your life jacket and report to your station. After the cover is removed you board your open lifeboat. The FIRST thing to do is to __________. #5 In rough weather, when a ship is able to maneuver, it is best to launch a lifeboat __________. #6 Prior to lowering the lifeboat, the most important item to check is the __________. #7 When lowering lifeboats in heavy seas, a good practice is to rig frapping lines __________. #8 When launching a lifeboat, frapping lines should be rigged __________. #9 What is the best procedure for picking up a lifeboat at sea while utilizing the lifeboat's sea painter? #10 When hoisting a boat on gravity type davits using an electric motor driven winch, the davit arms should be brought up __________. #11 When picking up a lifeboat at sea with way on the ship, the sea painter should be secured __________. #12 In launching a covered lifeboat, what would safely lower the lifeboat from inside the lifeboat cabin? #13 Which item is of the most use in getting a lifeboat away from a moving ship? #14 The sea painter of a lifeboat should be led __________. #15 When landing a lifeboat through heavy surf with a strong current running parallel to the beach (from right to left when facing from seaward) the recommended procedure is to __________. #16 If you must land on a beach with an oar-propelled lifeboat through a heavy surf, the recommended method is to __________. #17 You have abandoned ship and find yourself aboard a lifeboat in a heavy sea. Your boat is able to make way through the water. To prevent broaching, you should __________. #18 An "on-load" release system on a survival craft means the cable can be released __________. #19 The "off-load" release system on a survival craft is designed to be activated __________. #20 If the survival craft is not loaded to full capacity, the personnel should be __________. #21 During an abandonment or drill, the first person to arrive at the survival craft should __________. #22 When retrieving the survival craft, the winch operator should stop the winch and check __________. #23 While retrieving the survival craft, the engine should be stopped __________. #24 When retrieving the survival craft, the helmsman should instruct the crewman to __________. #25 Preventer bars are fitted on lifeboat releasing gear to prevent __________. #26 If the steersman of your lifeboat gives the command "Way enough", you should __________. #27 The boat command that means complete the stroke and level the oars horizontally with the blades trimmed fore and aft is __________. #28 The length of the steering oar in a lifeboat is __________. #29 If the coxswain of your lifeboat gives the command "Hold water" you should __________. #30 The steering oar in a lifeboat is __________.
Question Discussion & Notes
0Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.
Loading mariner discussions...