Pass Benchmark: 70% (21/30) • Standard: USCG NMC / 46 CFR

USCG Safety & Environmental Protection (Deck) (Set 42)

30:00

|

Question 1 of 30

Question Navigator

Correct Incorrect Pending Starred

Question 1 of 30

A sweep oar is an oar that is __________.

Browse Questions in Set 42

30 MCQs

#1 A sweep oar is an oar that is __________. #2 The steering oar in a lifeboat is usually referred to as the __________. #3 What should be used to steer an open lifeboat if the rudder becomes lost or damaged? #4 When a sea anchor is used in landing stern first in a heavy surf, sternway is checked by __________. #5 You are in a lifeboat in a heavy sea. Your boat is dead in the water and unable to make way. To prevent broaching, you should __________. #6 In heavy seas the helmsman should steer the motor lifeboat __________. #7 Steering a motor lifeboat broadside to the sea could cause it to __________. #8 When backing a motor propelled lifeboat (right-hand propeller) with the rudder amidships, the stern will back __________. #9 When using the lifeboat compass, you must be careful to __________. #10 If water is rising in the bilge of a survival craft, you should first __________. #11 If water is rising in the bilge of a lifeboat, you should FIRST __________. #12 A self-righting survival craft will return to an upright position provided that all personnel __________. #13 The purpose for the bag or box on top of some survival craft is to __________. #14 To disengage a survival craft suspended from the cable above the water, you must pull the safety pin and __________. #15 If there are no alternatives for escape, what is the maximum height that the survival craft could be dropped into the water? #16 Steering a survival craft broadside to the sea could cause it to __________. #17 In heavy seas the helmsman should steer the survival craft __________. #18 During the towing of a survival craft, a lookout should be on station to __________. #19 Before hydraulic starting of an engine on a covered lifeboat, what need NOT be checked? #20 Why are lifeboats usually double-enders? #21 Number 3 lifeboat would be __________. #22 The number 2 lifeboat on a tanker would be __________. #23 The bottom row of plating next to the keel of a lifeboat is known as the __________. #24 Your vessel is equipped with totally enclosed lifeboats. Which statement is TRUE when the boat is enveloped in flames? #25 Most enclosed lifeboats will right themselves after capsizing IF the __________. #26 Which statement about immersion suits is TRUE? #27 You are testing the external inflation bladder on an immersion suit and find it has a very slow leak. Which action should be taken? #28 Which statement about immersion suits is TRUE? #29 Which statement about immersion suits is TRUE? #30 Which statement concerning immersion suits is TRUE?

Question Discussion & Notes

0

Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.

Loading mariner discussions...