Pass Benchmark: 70% (21/30) • Standard: USCG NMC / 46 CFR
USCG Safety & Environmental Protection (Deck) (Set 56)
30:00
|Question 1 of 30
Question Navigator
Correct Incorrect Pending Starred
Question 1 of 30
In illustration D041DG below, which of the following is the symbol for the reference from which transverse measurements are made?
Browse Questions in Set 56
30 MCQs #1 In illustration D041DG below, which of the following is the symbol for the reference from which transverse measurements are made? #2 In illustration D041DG below, which of the following is the symbol for displacement? #3 In illustration D041DG below, what does symbol 1 refer to? #4 In illustration D041DG below, which symbol is the reference from which the height of the center of gravity is measured? #5 In the illustration D041DG below , what does symbol 2 represent? #6 In illustration D041DG below, which is the symbol for amidships? #7 In the illustration D041DG below , what does symbol 3 represent? #8 In the illustration D041DG below , what does symbol 5 represent? #9 The term "pintle" and "gudgeon" are associated with the __________. #10 The projecting lugs of the rudderpost which furnish support to the rudder are called __________. #11 The terms "cant frame" and "counter" are associated with the vessel's __________. #12 A Kort nozzle is a(n) __________. #13 A "contra-guide" is a type of __________. #14 The horizontal flat surfaces where the upper stock joins the rudder are the __________. #15 A chock __________. #16 What is the purpose of the freeing ports on a vessel with solid bulwarks? #17 Freeing ports on a vessel with solid bulwarks __________. #18 One function of a bulwark is to __________. #19 A deck fitting, used to secure line or wire rope, consisting of a single body with two protruding horns is called a __________. #20 A vessel is constructed with a steel hull and an aluminum superstructure. Which statement is TRUE? #21 Holes in the bulwark, which allow deck water to drain into the sea, are __________. #22 When using the term "limber system" one is referring to a __________. #23 "Limber" is a term associated with __________. #24 Which is an advantage of using watertight longitudinal divisions in double bottom tanks? #25 The floors in a vessel's hull structure are kept from tripping, or folding over, by __________. #26 Floors aboard ship are __________. #27 Aboard ship, vertical flat plates running transversely and connecting the vertical keel to the margin plates are called __________. #28 Frames to which the tank top and bottom shell are fastened are called __________. #29 Vertical structural members attached to the floors that add strength to the floors are called __________. #30 What is NOT an advantage of double bottom ships?
Question Discussion & Notes
0Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.
Loading mariner discussions...