Type a keyword to start searching...

Use ⌘K or Ctrl+K to search from anywhere
Pass Benchmark: 70% (21/30) Standard: USCG NMC / 46 CFR

USCG Safety & Environmental Protection (Deck) (Set 7)

|
Question 1 of 30
Question Navigator
Correct Incorrect Pending Starred
Question 1 of 30

You are monitoring VHF Channel 16 when you receive a call to your vessel, TEXAS PRIDE. What is the proper way to answer this call?

Browse Questions in Set 7

30 MCQs
#1 You are monitoring VHF Channel 16 when you receive a call to your vessel, TEXAS PRIDE. What is the proper way to answer this call? #2 What is the minimum operating capacity required for VHF Survival Craft Transceiver batteries? #3 The height of a VHF radio antenna is more important than the power output wattage of the radio because __________. #4 How many VHF Survival Craft Transceivers are required aboard passenger ships? #5 Which action should you take after sending a false Distress alert on VHF? #6 With what other stations may portable survival craft transceivers communicate? #7 All VHF marine band radios operate in the simplex mode, which means that __________. #8 What is the normal operating power for ship-to-ship communications on channel 13? #9 The VHF radiotelephone calling/safety/distress frequency is __________. #10 The VHF radiotelephone frequency designated to be used only to transmit or receive information pertaining to the safe navigation of a vessel is __________. #11 What frequency has the FCC designated for the use of bridge-to-bridge radiotelephone communications? #12 Channel 13 (156.65 MHz), the designated bridge-to-bridge channel, may NOT be used to __________. #13 Channel 13 is primarily used for ship to ship communication. Channel 13 is also authorized for __________. #14 You have just tried calling another vessel on the VHF and they have not replied. How long should you wait before calling that station again? #15 Marine Operators, when calling a ship on VHF-FM radiotelephone, normally call on channel __________. #16 You are making a telephone call ship-to-shore using the VHF-FM service. You can tell that the working channel is busy if you hear __________. #17 You are making ship-to-shore telephone calls on VHF. You should use the __________. #18 When do you use your FCC call sign when transmitting on channel 16? #19 You are using VHF channel 16 (156.8 MHz) or 2182 kHz. You need help but are not in danger. You should use the urgent signal __________. #20 What is the spoken emergency signal for a "man overboard" on the VHF radio? #21 Which kind(s) of broadcasts are available through Safety NET? #22 Which satellite system promulgated Maritime Safety Information? #23 Marine Safety Information is promulgated via satellite through which system? #24 When signaling by flag hoist, what signal indicates completion of the communication? #25 A vessel is signaling to you by flag hoist, and the answer pennant is hoisted close-up. What action should you take? #26 You are approaching another vessel and see that she has the signal flag "F" hoisted. What should you do? #27 You are approaching another vessel and see that she has the signal flag "A" hoisted. What should you do? #28 You are approaching another vessel and see that she has the signal flag "J" hoisted. What should you do? #29 You are approaching another vessel and see that she has the signal flag "W" hoisted. What should you do? #30 You are approaching a small vessel and see that it has the signal flag "T" hoisted. What should you do?

Question Discussion & Notes

0

Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.

Leave a Comment / Clarification

By posting, you agree to our Terms & Moderation Policy.

Loading mariner discussions...