Pass Benchmark: 70% (21/30) • Standard: USCG NMC / 46 CFR
USCG Safety & Environmental Protection (Deck) (Set 70)
30:00
|Question 1 of 30
Question Navigator
Correct Incorrect Pending Starred
Question 1 of 30
Your drafts are: FWD 16'-02", AFT 18'-02". Use the blue pages of the Stability Data Reference Book to determine the MT1.
Browse Questions in Set 70
30 MCQs #1 Your drafts are: FWD 16'-02", AFT 18'-02". Use the blue pages of the Stability Data Reference Book to determine the MT1. #2 Your drafts are: FWD 23'-03", AFT 27'-01". Use the blue pages of the Stability Data Reference Book to determine the MT1. #3 Your drafts are: FWD 20'-08", AFT 23'-03". Use the blue pages of the Stability Data Reference Book to determine the MT1. #4 A weight of 250 tons is loaded on your vessel 95 feet forward of the tipping center. The vessel's MT1 is 1000 ft-tons. What is the total change of trim? #5 A weight of 350 tons is loaded on your vessel 85 feet forward of the tipping center. The vessel's MT1 is 1150 foot-tons. What is the total change of trim? #6 The SS AMERICAN MARINER has drafts of: FWD 29'-04", AFT 30'-06". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 101.6 tons of seawater. #7 The maximum draft of the SS AMERICAN MARINER cannot exceed 28'-08" in order to cross a bar. The present drafts are: FWD 28'-00", AFT 29'-00". Use the white pages of the Stability Data Reference Book to determine the minimum amount of sea water to ballast the forepeak to achieve this condition. #8 The maximum draft of the SS AMERICAN MARINER cannot exceed 30'-01" in order to cross a bar. The present drafts are: FWD 29'-04", AFT 30'-06". Use the white pages of the Stability Data Reference Book to determine the minimum amount of sea water to ballast the forepeak to achieve this condition. #9 The draft of the SS AMERICAN MARINER cannot exceed 23'-06" in order to cross a bar. The present drafts are: FWD 22'-03", AFT 24'-00". Use the white pages of the Stability Data Reference Book to determine the minimum amount of sea water to ballast the forepeak to achieve this condition. #10 The SS AMERICAN MARINER has drafts of: FWD 26'-04", AFT 28'-08". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 101 tons of seawater. #11 The SS AMERICAN MARINER has drafts of: FWD 28'-00", AFT 29'-00". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 81.05 tons of seawater. #12 The SS AMERICAN MARINER has drafts of: FWD 25'-11", AFT 26'-11". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 83 tons of seawater. #13 The SS AMERICAN MARINER has drafts of: FWD 22'-03", AFT 24'-00". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 100.7 tons of seawater. #14 The SS AMERICAN MARINER has drafts of: FWD 22'-03", AFT 26'-05". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 77 tons of seawater. #15 The SS AMERICAN MARINER arrived in port with drafts of: FWD 19'-10.5", AFT 22'-11.6". Cargo was loaded and discharged as indicated in table ST-0154 below. Use sheet 2 in the white pages of The Stability Data Reference Book to determine the final drafts. #16 The SS AMERICAN MARINER has drafts of: FWD 28'-00", AFT 30'-04". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 110.8 tons of seawater. #17 The SS AMERICAN MARINER will sail with the load shown in table ST-0082 below. Use the white pages of The Stability Data Reference Book to determine the drafts. #18 The SS AMERICAN MARINER arrived in port with drafts of: FWD 21'-09.5", AFT 22'-09.5". Cargo was loaded and discharged as indicated in table ST-0087 below. Use sheet 2 in the white pages of The Stability Data Reference Book to determine the final drafts. #19 The SS AMERICAN MARINER has drafts of: FWD 22'-03", AFT 25'-05". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 97 tons of seawater. #20 The SS AMERICAN MARINER arrived in port with drafts of: FWD 21'-10.6", AFT 22'-11.6". Cargo was loaded and discharged as indicated in table ST-0089 below. Use sheet 2 in the white pages of The Stability Data Reference Book to determine the final drafts. #21 The SS AMERICAN MARINER has drafts of: FWD 18'-07", AFT 23'-03". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 92 tons of seawater. #22 The SS AMERICAN MARINER arrived in port with drafts of: FWD 28'-08", AFT 29'-05'. Cargo was loaded and discharged as indicated in table ST-0081 below. Use sheet 2 in the white pages of the Stability Data Reference Book to determine the final drafts. #23 The SS AMERICAN MARINER has drafts of: FWD 13'-05", AFT 21'-03". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 88 tons of seawater. #24 The SS AMERICAN MARINER arrived in port with drafts of: FWD 28'-04", AFT 30'-08". Cargo was loaded and discharged as indicated in table ST-0092 below. Use sheet 2 in the white pages of the Stability Data Reference Book to determine the final drafts. #25 The SS AMERICAN MARINER arrived in port with drafts of: FWD 29'-06", AFT 29'-02". Cargo was loaded and discharged as indicated in table ST-0110 below. Use sheet 2 in the white pages of the Stability Data Reference Book to determine the final drafts. #26 The SS AMERICAN MARINER arrived in port with drafts of: FWD 18'-05", AFT 20'-11". Cargo was loaded and discharged as indicated in table ST-0114 below. Use sheet 2 in the white pages of the Stability Data Reference Book to determine the final drafts. #27 The SS AMERICAN MARINER arrived in port with drafts of: FWD 18'-06", AFT 21'-10". Cargo was loaded and discharged as indicated in table ST-0123 below. Use sheet 2 in the white pages of the Stability Data Reference Book to determine the final drafts. #28 The SS AMERICAN MARINER has drafts of: FWD 16'-10", AFT 19'-04". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 73 tons of seawater. #29 The SS AMERICAN MARINER arrived in port with drafts of: FWD 17'-10", AFT 19'-06". Cargo was loaded and discharged as indicated in table ST-0134 below. Use sheet 2 in the white pages of the Stability Data Reference Book to determine the final drafts. #30 The SS AMERICAN MARINER has drafts of: FWD 19'-04", AFT 21'-02". Use the white pages of the Stability Data Reference Book to determine the drafts if you ballast the forepeak with 68 tons of seawater.
Question Discussion & Notes
0Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.
Loading mariner discussions...