Pass Benchmark: 70% (21/30) • Standard: USCG NMC / 46 CFR

USCG Engineering Safety & Environmental Protection (Set 3)

30:00

|

Question 1 of 30

Question Navigator

Correct Incorrect Pending Starred

Question 1 of 30

The hand brake of a lifeboat winch is __________.

Browse Questions in Set 3

30 MCQs

#1 The hand brake of a lifeboat winch is __________. #2 In order for the automatic lifeboat drain to operate properly __________. #3 Which of the lifeboat parts listed must be painted bright red? #4 When lowering lifeboats as the vessel is pitching in heavy seas, a good practice is to rig frapping lines __________. #5 The purpose of the wire stretched between the lifeboat davit heads is to __________. #6 When a helicopter is lifting personnel from an enclosed lifeboat, the other individuals in the boat should __________. #7 Your vessel is equipped with totally enclosed lifeboats. Which of the following statements is correct should the boat be enveloped in flames? #8 A self-righting survival craft will return to an upright position provided that all personnel __________. #9 When the survival craft is supplied with bottles of compressed air, they are used for __________. #10 While retrieving the survival craft, the engine should be stopped __________. #11 Using a sea anchor with the survival craft will __________. #12 To activate an air regeneration canister on a survival craft, you __________. #13 With the sprinkler system and air system on, and all hatches shut, the survival craft will be protected from __________. #14 When inspecting a survival craft, you should check to make sure that the __________. #15 When collecting condensation for drinking water, __________. #16 Provided every effort is used to preserve body moisture content by avoiding perspiration, how long is it normally possible to survive in a survival craft without stored quantities of water? #17 When a rescue vessel approaches a survival craft in heavy seas, the person in charge of the survival craft should __________. #18 The survival craft engine is fueled with __________. #19 An 'on-load' release system on a survival craft means the cable can be released __________. #20 Who is responsible for lowering the survival craft? #21 During fueling operations oil is detected in the water adjacent to your vessel. If however, it is determined to be from some source other than your vessel, you should __________. #22 When you have completed bunkering operations, the hoses should be __________. #23 The most critical part of the bunkering operations, which can result in an oil spill, is when the __________. #24 When the scuppers are plugged and an oil spill occurs on deck, you should __________. #25 In cleaning up an oil spill, the use of straw or reclaimed paper fibers would be an example of which type of oil removal? #26 While loading bulk oil, you notice oil on the water near the barge. Which of the following actions should you carry out FIRST? #27 Small oil spills on deck can be prevented from contaminating any waters by __________. #28 Where will you find the procedures for the reporting of oil discharge into the water? #29 During oil transfer operations, who would be responsible to guarantee that the posted transfer procedures are being followed? #30 The amount of garbage disposed must be entered into the records maintained by each ship and stated in __________.

Question Discussion & Notes

0

Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.

Loading mariner discussions...