Type a keyword to start searching...

Use ⌘K or Ctrl+K to search from anywhere
Pass Benchmark: 70% (21/30) Standard: USCG NMC / 46 CFR

USCG Engineering Safety & Environmental Protection (Set 9)

|
Question 1 of 30
Question Navigator
Correct Incorrect Pending Starred
Question 1 of 30

After ballasting a fuel tank, which of the listed valves should you close FIRST?

Browse Questions in Set 9

30 MCQs
#1 After ballasting a fuel tank, which of the listed valves should you close FIRST? #2 In order to prevent the unnecessary release of hydrocarbons to atmosphere, when taking on departure ballast, one method used is to _________. #3 When discharging clean ballast, prior to entering the loading port, if the ballast is determined by the oil monitor to exceed 15 parts per million of oil, the deballasting must _________. #4 Victual waste is __________. #5 When dumping garbage into the sea, other than special areas, __________. #6 The amount of garbage disposed must be entered into the records maintained by each ship and stated in __________. #7 According to 33 CFR's, an oceangoing ship of over 400 gross tons must be fitted with a standard discharge shore connection. What size bolt circle diameter is required for this shore connection to transfer oily ballast to a shore side reception facility? #8 The most critical part of the bunkering operations, which can result in an oil spill, is when the __________. #9 When the scuppers are plugged and an oil spill occurs on deck, you should __________. #10 Which of the precautions listed should be observed when taking on diesel fuel? #11 Your vessel is taking on bunkers from a shore side facility. If oil begins flowing from one tank vent, which of the following actions should be taken FIRST? #12 When should you expect to find an insulating flange in a fueling hose? #13 As its temperature rises, the volume of fuel oil stored in a tank will __________. #14 To determine if all requirements of the Declaration of Inspection are met for oil transfer operations just prior to bunkering from a shore side facility, __________. #15 Why is it important for double bottom fuel oil tanks not to be topped off when loading fuel at cold temperatures? #16 As a precaution against oil spills when topping off fuel tanks, you should __________. #17 Where will you find the procedures for the reporting of oil discharge into the water? #18 During oil transfer operations, who would be responsible to guarantee that the posted transfer procedures are being followed? #19 A method NOT usually allowed for cleaning up oil spills would be the use of __________. #20 In cleaning up an oil spill, the use of straw or reclaimed paper fibers would be an example of which type of oil removal? #21 Small oil spills on deck can be prevented from contaminating any waters by __________. #22 Coast Guard regulations require a shipboard oil pollution emergency plan to be reviewed __________. #23 Which of the following is a mandatory section of the shipboard oil pollution emergency plan? #24 When amendments are made to the shipboard oil pollution emergency plan, all revisions must be submitted to the Coast Guard __________. #25 Which of the following is NOT required to be provided as part of the appendixes of the Shipboard Oil Pollution Emergency Plan? #26 U.S. flag ships may obtain an Oil Record Book from the __________. #27 The Oil Record Book for all U.S. ships ________. #28 In the Oil Record Book, a comprehensive list of operational items are grouped into operational sections. Each section is codified by a/an __________. #29 The overall responsibility in maintaining the Oil Record Book is given to ________. #30 Each operation involving the transfer of oil or oily mixture that requires an entry in the OIL Record Book shall be fully recorded ________.

Question Discussion & Notes

0

Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.

Leave a Comment / Clarification

By posting, you agree to our Terms & Moderation Policy.

Loading mariner discussions...