BIGF - Basic Training for Ships subject to the IGF Code Exit Exam Questions - Set 5

Question 1

Which international regulation specifies the minimum standard for environmental protection and MARPOL standards concerning Basic IGF Code?

Accepted Answer

D: STCW Code Section A-V/3-1 and relevant SOLAS/MARPOL conventions

Answer

A: Port State Control advisory note only

Answer

B: International Load Line Certificate Annex 3

Answer

C: Tonnage Measurement Convention 1969

Question 2

In the event of an emergency involving environmental protection and MARPOL standards during Basic IGF Code tasks, what immediate action is required?

Accepted Answer

C: Raise the alarm, notify the Officer of the Watch, and execute assigned muster list duties

Answer

A: Attempt to resolve the incident silently without raising the alarm

Answer

B: Evacuate the vessel immediately without informing the bridge

Answer

D: Wait until the end of the watch to log the issue

Question 3

How frequently must operational drills and practical checks for environmental protection and MARPOL standards be conducted for Basic IGF Code?

Accepted Answer

B: At least monthly or as mandated by SOLAS and shipboard safety management system (SMS)

Answer

A: Only when requested by port State control inspectors

Answer

C: Annually prior to vessel drydocking

Answer

D: Once every 5 years during special survey

Question 4

What documented record must be maintained on board following completion of tasks related to environmental protection and MARPOL standards in Basic IGF Code?

Accepted Answer

C: Entry in the official Deck or Engine Logbook recording date, time, and operational parameters

Answer

A: Unsigned note on the shipboard notice board

Answer

B: Verbal update to port agent without logging

Answer

D: No written record is required

Question 5

What type of personal protective equipment (PPE) is essential when handling environmental protection and MARPOL standards under Basic IGF Code guidelines?

Accepted Answer

A: Certified task-specific PPE meeting SOLAS/IMO performance standards

Answer

B: High-visibility vest only

Answer

C: Standard street clothing with rubber gloves

Answer

D: Basic cotton coveralls without eye or foot protection

Question 6

What parameter must be verified prior to authorizing enclosed space entry for environmental protection and MARPOL standards related to Basic IGF Code?

Accepted Answer

D: Atmospheric oxygen level at 20.9% and zero toxic/flammable gas concentration

Answer

A: Temperature check only

Answer

B: Oxygen level at 15% with ventilation turned off

Answer

C: Visual inspection through access hatch without gas testing

Question 7

What key responsibility belongs to seafarers performing watchkeeping duties for environmental protection and MARPOL standards under Basic IGF Code?

Accepted Answer

A: Continuous monitoring of operational parameters and immediate reporting of anomalies

Answer

B: Bypassing safety trips during routine operations

Answer

C: Operating equipment beyond design pressure limits

Answer

D: Leaving watchkeeping station unattended

Question 8

Which document contains detailed hazard data and emergency handling instructions for substances involved in environmental protection and MARPOL standards during Basic IGF Code?

Accepted Answer

D: Safety Data Sheet (SDS) / Material Safety Data Sheet (MSDS)

Answer

A: Bill of Lading description

Answer

B: Crew List document

Answer

C: Ship's Cargo Manifest summary page

Question 9

___ could be sometimes consaderabfy betow the knl

Accepted Answer

A: Dangerous concentration levels

Answer

B: Deep concentration levels

Answer

C: Deep connection levels

Answer

D: Depth concentration levels

Question 10

What are the arrangements complyied with the following requirements?

Accepted Answer

C: both (a) and (b)

Answer

A: Failure developments that can be reliably detected before reaching a critical state

Answer

B: Failure developments that cannot be safely detected before reaching a critical state

Answer

D: none of the above

Question 11

To ensure no release occurs during the hook-up or disconnect of any components during the bunkering process

Accepted Answer

B: gassing up of the bunker piping systems with LNG prior to connect or disconnect 5 necessary

Answer

A: draining of the bunker piping systems prior to connect or disconnect s necessary

Answer

C: purging of the bunker piping systems with inert gas prior to connect or disconne s recei

Answer

D: none of the above

Question 12

Compression Ratio is the ratio of the absolute ___ dtSCharge from a by ft c, at the suction

Accepted Answer

B: pressure

Answer

A: volume

Answer

C: mass

Answer

D: temperature the discharge from a compressor dived by the absolute resure

Question 13

In a gas safe machinery space any single fault is not aftcMied to caise the ps -tk ca ft c a r a f..,. _,ta z

Accepted Answer

C: Gas pipelines should be checked regularly for leakages

Answer

A: gas safe machinery space any single fault is not allowed to cause the gas release into the machinery space and here O a) Alarms and gas detector are required to be installed

Answer

B: Pipelines should be thick walled and of robust construction

Answer

D: Preventive measures such as double-walled piping systems must be apoled to cacure the Bared pr

Question 14

- - -- - -- - 8. In gas compressors and pumps, arrangements are made to ensure that ooder no orcumstVUS ___ an ht: •notiad in the gas control section or gas-fuelled machinery

Accepted Answer

A: Heavy fuel oil

Answer

B: liquefied gas

Answer

C: water

Answer

D: inert gas • 0 can be introduced

Question 15

In liquefaction plant which gas is removed asltfreezesia M•tdrl d v.n

Accepted Answer

C: carbon dioxide

Answer

A: temperature above boing point of ugues Nature Sa. O a) methane

Answer

B: hydrocarbons

Answer

D: ethane

Question 16

What is provided in bilge well in each tank connection space of an independent iqueted yes surge and

Accepted Answer

C: unsafety systems

Answer

A: a level indicator

Answer

B: a temperature sensor

Answer

D: both (a) and (b)

Question 17

Substance of cargo vapour in air which is not flammable

Accepted Answer

B: Methane

Answer

A: Ammonia

Answer

C: Chlonine

Answer

D: Propane

Question 18

When electrical equipment fitted an an 50-pro(eaed rniChne!y IDld i e, ,:+ - ta

Accepted Answer

C: Fire and gas alarms

Answer

A: equipment fitted in an ESD-protected machinery space then the machinery space shouid have O a) Ventilation fans shall be certified safe for hazardous area tone 1

Answer

B: Fire and gas hydrocarbon detectors

Answer

D: All of above,

Question 19

For engines fitted with ignition systems, when would the, correct operaton of the goon system on each unit shal be verified?

Accepted Answer

A: prior to admission of gas fuel

Answer

B: after admission of gas fuel

Answer

C: every three months

Answer

D: as time permits

Question 20

Stop valves shall be fitted in the water spray application main supply line:

Accepted Answer

D: At intervals not exceeding 40 metres, for the purpose of isolating damaged sections

Answer

A: At intervals not exceeding 35 metres, for the purpose of isolating damaged sections

Answer

B: At intervals not exceeding 45 metres, for the purpose of isolating damaged sections

Answer

C: At intervals not exceeding 50 metres, for the purpose of isolating damaged sections

Question 21

When there tS rupture in gas suw, a vatYe st-.1 be torNl:JQly d'f""' re: illitlilC

Accepted Answer

C: Shouid be as close as possible to the point of entry inside the engine-room

Answer

A: valve shall be automatically shut off fuel and which Cal Be a separate valve or combined with other functions eg the master valve

Answer

B: Should be fitted before gas supply popeline enters the engine room

Answer

D: All of above

Question 22

Fuel containment design shaU take Into accotllt fdl!'ltial fallrt CIII SI , b It r I .._

Accepted Answer

A: implies minor release of the fuel.

Answer

B: implies release of the fuel and potential for human inyury

Answer

C: implies significant release of the fuel and high potental for human injury fatality.

Answer

D: none of the above

Question 23

You should always check closed doors for before opening them

Accepted Answer

A: heat from fire.

Answer

B: paint

Answer

C: cleanliness

Answer

D: None of the above

Question 24

which steps are required for recognizng True fire prevention?

Accepted Answer

C: at least reduong ts potental

Answer

A: fire hazards

Answer

B: moving hazards

Answer

D: All the above

Question 25

How is the gas detection required?

Accepted Answer

A: non-continuous with delay

Answer

B: continuous without delay

Answer

C: continuous with delay

Answer

D: non-continuoss without delay

Question 26

Air locks provides __ _

Accepted Answer

C: both (a) and (b)

Answer

A: free and easy passage

Answer

B: a deck area not less than 15 m2

Answer

D: none of the above

Question 27

Common causes like - Improper hose connection, excessive movement of the icading am or taster syden, say ven drifts or sails away with hose still connected, etc can lead to which events during LNG bunkerry

Accepted Answer

A: Leaks from ENG pumps. pipes, hoses or tanks

Answer

B: Inadvertent disconnection of hoses

Answer

C: Overfilling overpressuring vessel fuel tanks

Answer

D: External impact

Question 28

Ventilation systems is required to avoid __ _

Accepted Answer

A: gas accumulation

Answer

B: gas seperation

Answer

C: gas maintenance

Answer

D: none of the above

Question 29

Personnel should not enter or wort in a tank or erdaSPd spam

Accepted Answer

A: tank or enclosed space until which condition? O a) flammability condition

Answer

B: safe working condition

Answer

C: non safe working condition

Answer

D: lack of oxygen condition

Question 30

What is the ventilation capacity of fuel preparaton rooms, pump and compressor rooms?

Accepted Answer

A: 30 air changes per hour

Answer

B: 30 air changes per sec

Answer

C: 30 air changes per min

Answer

D: 30 air changes per milli sec

Basic Training for Ships subject to the IGF Code (BIGF) (Set 5)

Which international regulation specifies the minimum standard for environmental protection and MARPOL standards concerning Basic IGF Code?

Questions in BIGF Set 5

Question Discussion & Notes

Leave a Comment / Clarification