Pass Benchmark: 70% (21/30) • Standard: USCG NMC / 46 CFR
USCG Deck General (Set 46)
30:00
|Question 1 of 30
Question Navigator
Correct Incorrect Pending Starred
Question 1 of 30
What does the MARPOL 73/78 convention deal with?
Browse Questions in Set 46
30 MCQs #1 What does the MARPOL 73/78 convention deal with? #2 It would be prudent to perform which of the following actions prior to the commencement of bunkering? #3 In reference to accidental oil pollution, the most critical time during bunkering is when __________. #4 U.S. regulations require that all oil spills in United States waters be reported immediately. Who is this report made to? #5 Your vessel is taking on cargo oil when a small leak develops in the hose. You order the pumping stopped. What action should you take before you resume pumping? #6 While loading bulk oil, you notice oil on the water near the barge. Which of the following actions should you carry out FIRST? #7 When you notice oil on the water near your vessel while taking on fuel, what should your first action be? #8 Which is NOT a safety precaution to be observed during the loading of LFG? #9 Which statement about the use of portable electric lights in petroleum product tanks is TRUE? #10 Why is a warning sign displayed at the gangway or access point of a barge during cargo transfer? #11 According to 46 CFR there are specific alarms that are required to be tested prior to cargo transfer. Which of the following items does not require testing? #12 For all loading operations, the terminal must supply the vessel with a means in which the vessel's designated person-in-charge may stop the flow of oil to the vessel, insuring immediate shutdown in the event of a hose rupture, tank overflow, etc. Which of the following choices will accomplish this task as required by 33 CFR? #13 If a repair team is to enter a confined space for repair work, what minimum level of oxygen should be present? #14 Who completes the Declaration of Inspection before loading a tank vessel? #15 U.S. regulations require a meeting before starting any oil transfer operation. Who must be in attendance at this meeting? #16 The person in charge on the vessel and the person in charge at the facility must hold a meeting before starting the transfer of oil. Who must decide to start the transfer? #17 U.S. regulations state that no person may transfer oil to or from a vessel unless which of the following conditions is met? #18 What should you do in order to reduce the accumulation of static electricity while loading petroleum products? #19 To insure proper seating when closing a valve on a tank, what position should the valve be in? #20 What is the lowest temperature at which a liquid will give off sufficient vapors to form a flammable mixture with air? #21 Which statement is TRUE concerning insulating flanges? #22 When is it acceptable to use power-driven or manually-operated spark producing devices in the pump room, where grades A, B, C, and D liquid cargoes are involved? #23 Which of the following does not require cargo transfer operations on a tank vessel to be stopped? #24 According to U.S. regulations, which of the following is a requirement of the ventilation system of a pump room on a tanker? #25 What is the inert gas system on a tanker used for? #26 U.S. regulations require an emergency means of stopping the flow of oil or LNG during transfer operations. The emergency means may be which of the following? #27 Who is responsible for the final inspection ensuring a tank barge is provided with the required equipment and has fittings in good and serviceable condition prior to loading cargo? #28 Which of the following describes intrinsically safe equipment? #29 The flame screens installed on tank vents that may contain combustible gases, are designed to prevent explosions by which of the following? #30 The intakes for an air compressor on a tank vessel carrying grade A cargo may be located in which of the following areas?
Question Discussion & Notes
0Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.
Loading mariner discussions...