BrightMariner Logo BrightMariner

Type a keyword to start searching...

Use ⌘K or Ctrl+K to search from anywhere

Advanced Training for Ships subject to the IGF Code (AIGF) (Set 9)

30:00
|
Question 1 of 30
Question Navigator
Correct Incorrect Pending Starred
Question 1 of 30

Speed recovery solutions can save fuel upto

Questions in AIGF Set 9

Tap to expand question list

30 MCQs
Q1
Speed recovery solutions can save fuel upto
Q2
Coating is done to reduce ___________
Q3
________ is an engine for reduction of the vessels maximum speed to increase the efficiency by limiting the potential power output
Q4
LNG fuel should have after treatment systems like ___________
Q5
_______ should have after treatment systems like oxidation catalyst
Q6
Slow steaming is otherwise called
Q7
The cooling jacket of a hybrid turbo charger is made up of which material
Q8
GCU means ___________________
Q9
_____________ utilized for gas freeing of tanks may be provided externally to the ship.
Q10
Spaces surrounding fuel tanks is filled with which type of air?
Q11
What is electrically bonded in ship's structure?
Q12
All pipelines isolated in a liquid full condition are provided with ___________
Q13
Pipework contain ____________ which is thermally insulated to an extent which will minimize condensation of moisture
Q14
Pipework contain low temperature liquid or gas which is thermally insulated to an extent which will ___________
Q15
Piping other than fuel supply piping, what is arranged in the double wall piping?
Q16
Piping other than cabling, what is arranged in the double wall piping?
Q17
What is provided that they do not create a source of ignition compromise the integrity of the double pipe?
Q18
In the minimum wall thickness, t=(to + b + c)/(1 - a/100)(mm), What is to?
Q19
Indicators fitted on the navigation bridge, ,the engine control room and the manoeuvring platform operation of Main engine
Q20
Indicators fitted on the ____________ ,the engine control room and the manoeuvring platform operation of Main engine
Q21
Where is permanently installed gas detectors fitted?
Q22
Where is redundant gas detection systems be provided?
Q23
In which area electrical equipment or wiring are not installed unless essential for operational purposes or safety enhancement?
Q24
How is the lighting system in hazardous areas be divided ?
Q25
Where will the switches and protective devices interrupt all poles or phases are provided
Q26
The liquefied gas fuel containment system structure and its structural components shall withstand _______________ without loss of containment
Q27
The liquefied gas fuel containment system structure and its structural components shall withstand loads liable to occur during its ____________ without loss of containment.
Q28
In Ultimate Design Conditions –the design shall take into account proper combinations of which type of loads?
Q29
What are the accident design conditions addressed in IGF Code?
Q30
The hull structure may be designed as a secondary barrier where the liquefied gas fuel temperature at atmospheric pressure is not below minus 55°C on ______________

Question Discussion & Notes

0

Have a doubt, memory trick, or exam update? Share your insights with fellow mariners.

Leave a Comment / Clarification

By posting, you agree to our Terms & Moderation Policy.

Loading mariner discussions...